![background image](http://html1.mh-extra.com/html/omron/dst1-series/dst1-series_operation-manual_743062013.webp)
Precautions
Precautions
1 Intended
Audience
This manual is intended for the following personnel, who must have knowledge of
electrical systems (an electrical engineer or the equivalent).
•
Personnel in charge of introducing FA and safety systems into production facilities
•
Personnel in charge of designing FA and safety systems
•
Personnel in charge of managing FA facilities
•
Personnel who have the qualifications, authority, and obligation to provide safety
during each of the following product phases: mechanical design, installation, operation,
maintenance, and disposal
2 General
Precautions
The user must operate the product according to the performance specifications
described in the operation manuals.
Before using the product under conditions which are not described in the
manual or applying the product to nuclear control systems, railroad systems,
aviation systems, vehicles, combustion systems, medical equipment, amusement
machines, safety equipment, and other systems, machines, and equipment
that may have a serious influence on lives and property if used
improperly, consult your OMRON representative.
Make sure that the ratings and performance characteristics of the product are
sufficient for the systems, machines, and equipment, and be sure to provide
the systems, machines, and equipment with double safety mechanisms.
This manual provides information for programming and operating the Unit. Be
sure to read this manual before attempting to use the Unit and keep this manual
close at hand for reference during operation.
WARNING
It is extremely important that a PLC and all PLC Units be used for the specified purpose and under the
specified conditions, especially in applications thatcan directly or indirectly affect human life. You must
consult with your OMRON representative before applying a PLC System to the above-mentioned
applications.
7
Summary of Contents for DST1 Series
