![background image](http://html1.mh-extra.com/html/omron/dst1-id12sl-1/dst1-id12sl-1_operation-manual_743063112.webp)
88
Specifications
Section 4-1
4-1
Specifications
4-1-1
Common Specifications
4-1-2
Current Consumption and Weights
Note
This does not include the current consumption of the externally connected
devices.
The maximum current that can be supplied to the I/O power terminal is shown
below.
Note
The I/O power supply current is calculated as shown below.
• Input device and test output power terminal
I/O power supply current that can be supplied to V and G terminals =
input current (of number of points used) + test output current (of number
of points used) + current consumption for I/O power supply
Item
Specifications
Communications power supply voltage
11 to 25 V DC (Supplied from the communications connector.)
I/O power supply voltage
20.4 to 26.4 V DC (24 V DC,
−
15% to +10%)
EMC
Conforms to IEC61131-2.
Vibration resistance
10 to 57 Hz: 0.35-mm single amplitude,
57 to 150 Hz: 50 m/s
2
Shock resistance
150 m/s
2
for 11 ms
DST1-MRD08SL-1: 100 m/s
2
for 11ms
Operating temperature
−
10 to 55
°
C
Relative humidity
10% to 95% (with no condensation)
DST1-MRD08SL-1: 10% to 85% (with no condensation)
Operating environment
No corrosive gases
Storage temperature
−
40 to 70
°
C
Mounting
35-mm DIN Track
Degree of protection
IP20
Overvoltage Category
II
Model
Communications current
consumption
Current consumption for I/O
power supply (See note.)
Weight
DST1-ID12SL-1
100 mA at 24 V DC
70 mA at 24 V DC
420 g
DST1-MD16SL-1
110 mA at 24 V DC
50 mA at 24 V DC for inputs
130 mA at 24 V DC for outputs
420 g
DST1-MRD08SL-1
100 mA at 24 V DC
80 mA at 24 V DC for inputs
130 mA at 24 V DC for outputs
600 g
DST1-XD0808SL-1
110 mA at 24 V DC
50 mA at 24 V DC for inputs
130 mA at 24 V DC for outputs
420 g
Model
Terminals
I/O power supply current
DST1-ID12SL-1
V, G
2.94 A
DST1-MD16SL-1
V0, G0
2.90 A
V1, G1
4.13 A
DST1-MRD08SL-1
V0, G0
2.90 A
V1, G1
0.13 A
DST1-XD0808SL-1
V0, G0
2.90 A
V1, G1
4.13 A
Summary of Contents for DST1-ID12SL-1
