Omron CX-SUPERVISOR - SCRIPT REFERENCE REV2.0, Reference Manual

Page: 82 / 195

OMRON CHAPTER 6 – Functions and Methods
Revision 2.0 Page 69
SetPLCMode
Syntax
returnstate = SetPLCMode(“plcname”, mode, processed)
Remarks
Argument Type Description
returnstate bool Returnstate is ‘1’ if the function is successful, or ‘0’ otherwise.
plcname string Name of PLC.
mode string A value for the new PLC mode. Valid modes are ‘STOP’,
‘DEBUG’, ‘RUN’ and ‘MONITOR’.
processed bool processed is set to ‘TRUE’ when the operation is actually
completed.
Typical Examples
SetPLCMode(“controlPLC”, “STOP”, done)
In this example, the mode of the PLC called ‘controlPLC’ is changed to “STOP”.
Note: The mode may not be changed immediately after the statement has been executed. The
processed flag ‘done’ is set at a later time when the operation has been completed.
Therefore, if using statements that require the operation to be completed create an On
Condition script containing the code to be executed after the mode is set, with the
processed flag as the expression (e.g. ‘done’).
SetPLCPhoneNumber
Syntax
Returnstate = SetPLCPhoneNumber(“plcname”, numbertext)
Remarks
Argument Type Description
returnstate bool Returnstate is ‘1’ if the function is successful, or ‘0’ otherwise.
plcname string Name of PLC to change the number of.
numbertext string New phone number for the PLC.
Typical Example
SetPLCPhoneNumber(“controlPLC”, “01234 987654”)
The phone number for the PLC is changed to the required value.