Omron CX-Process Tool, Introduction Manual, Page: 27 / 40

11
1-19
Uploading and Saving Function Block Data
11
11-1-1. Right-click and select
Transfer from LC - Previous
.
11-1-2. Start the transfer.
Click the OK Button.
Click the Start Button.
Transferring the setting parameters
from the Loop Controller to the comput-
er will begin. The window will close
when the transfer has been completed.
Click the OK Button.
11-1. Upload the data from the actual Loop Controller.
11-2. Save the function block data.
Upload the parameters (e.g., PID con-
stants) tuned in the actual Loop Con-
troller to the computer. Right-click
in the tree in the
window on the left and select
Transfer
from LC - Previous
.
Uploading and Saving Function Block Data
11
Uploading
and
Saving
Function
Block
Data
Upload the data from the actual
Loop Controller and save the
data in a file.
Click the Save Button on the toolbar
to save the function block data.
Tuned function
block data
Uploading
Loop Controller
Uploading
Saving data