Omron COMP Air Elite NE-C30, Instruction Manual

Page: 23 / 68

22
4. Complete your treatment.
1) When you have finished inhaling your medication,
turn the compressor off.
Press the power switch, and make sure that the
power indicator is out.
2) Unplug the air tube from the nebulizer kit.
NOTE:
Always hold the air plug when disconnecting the air tube.
3) Check that there is no condensation or moisture remaining in the air tube.
4) Unplug the air tube from the compressor.
WARNING :
Condensation may occur in the air tube. Do not store the air tube while it
contains condensation or moisture. This could result in infection via
bacteria.
5-a) When using AC adapter
Unplug the device from the power outlet.
5-b) When using battery
To separate the compressor and battery, press the push
button on the side of the battery and lift the
compressor off the battery.
If there is moisture or liquid remaining in the air tube, be sure to follow
the procedure below to remove any moisture from within the air tube.
i) Make sure that the air tube is still connected to the air connector on the
compressor.
ii) Turn on the compressor and pump air through the air tube to expel the moisture.
HOW TO TAKE MEDICATION
Power Outlet
Power Indicator
Push button
NE-C30-C3_C_M.qxd 11.11.24 4:15 PM Page 22