5
Right click on the Solution Explorer project
name at the upper right of the Power PMAC
IDE screen, select
Build and Download
All Programs
, and execute Build and
Download.
6
Make sure that there are no errors in the
Output window.
3-6-3
Setup of Control Commands
Set the feedback signal of the Galvo Scanner to the current position.
1
Type the
Motor[3].pDac=Sys.Udata[0].a
com-
mand in the Power PMAC IDE Termi-
nal.
2
Type the
Motor[4].pDac=Sys.Udata[0].a
com-
mand in the Power PMAC IDE Termi-
nal.
3 Connection Procedures
3-47
Application Guide Laser Application (O052)
3-6 Setup of the Galvo Scanner
3
3-6-3
Setup of Control Commands
Summary of Contents for CK3M-CPU 1 Series
