![background image](http://html.mh-extra.com/html/omron/c200hw-clk21/c200hw-clk21_operation-manual_742483052.webp)
27
Selection of Communications Functions
Section 1-3
When Operating on Personal Computer as Peripheral Software
When Operating on Personal Computer Connected as a Node
1-3
Selection of Communications Functions
Select the data link function if alarm or status data (in bits) must be constantly
shared between PLCs or between a PLC and an IBM PC/AT or compatible
computer or if the present value or set value data (in words) must be con-
stantly shared between PLCs or between a PLC and an IBM PC/AT or com-
patible computer.
Select the message service function (SEND/RECV instructions or CMND
instructions) if data (in words) must be sent (or received) from one PLC to
other PLCs in other nodes or from one PLC to IBM PC/AT or compatible com-
puters.
1-4
Basic Procedures
Preparations
C200HX/HG/HE and CQM1H-series PLCs
1,2,3...
1.
Perform mounting and wiring.
• Mount to the PLC.
+
Transmissions
Setting data link tables
CX-Net in
CX-Programmer
IBM PC/AT or
compatible
Nodes
Controller
Link Unit
CPU Unit
RS-232C
…
Software
External
appearance
Model
Applicable PLCs
CX-Programmer
WS02-CXPC
@
-E-V
@
CS/CJ-series,
C200HX/HG/HE,
CVM1, CV-series,
and CQM1H-series
PLCs
IBM PC/AT or compatible
+
Controller Link
Support Board
Setting data link tables
CX-Net in
CX-Programmer
…
Summary of Contents for C200HW-CLK21
