BNB75T/BNB300T Instruction Manual
5
BN50T/BN75T
1
. Use a screwdriver to loosen (turn counter-clockwise) the 2 screws at the top of the front
panel of the unit, until they turn freely. (The screws cannot be removed from the front
panel.) 1) Lower the front panel and pull toward you to remove. 2) Place the removed
front panel on the unit. 3)
Loosen the 2 screws.
2)
3)
1)
Caution
(for maintenance)
Do not pull the cables of the LCD or disconnect the connec-
tors.
2
. Remove the battery cable from the cable holder. 1)
The battery connector is locked in the fastening hole in the plate. Lift the connector (2)-1),
move to the center of the hole (2)-2), and pull the connector to the back to unlock (2)-3).
Hold the battery connector, and pull the connectors apart. 3)
Disconnect by holding here.
2)-1
2)-2
2)-3
3)
Connector
locked
Move
connector to
hole’s
center
Connector
unlock
Back of the plate cover
1) Cable holder
Battery connector
3)
