Omron A2W-R**-WC1 Series, User Manual

Page: 56 / 96

4 Installation and Wiring of the Master Unit
4 - 10 Wireless Pushbutton Switch User’s Manual (A265)
Insert the solid wire or ferrule straight into the terminal block until the end strikes the terminal block.
If a wire is difficult to connect because it is too thin, use a flat-blade screwdriver in the same way as
when connecting stranded wire.
4-3-2 Push-In Plus Terminal Block
Item Specifications
Construction
Hands free
Front-in front and front-release
Applicable wires Stranded wires, solid wires, or ferrules
Applicable wire size
0.25 to 1.5 mm
2
(AWG24 to AWG14)
Wire insertion force 8 N max. for AWG20 wire
Screwdriver insertion
force 15 N max.
Stripping length
Refer to the “Stripping length” of “Precautions for Safe Use” in 4-3 Connecting Wires
to Push-In Plus Terminal Block on page 4-9.
Ferrule conductor
length Refer to the “Stripping length” of “Precautions for Safe Use” in 4-3 Connecting Wires
to Push-In Plus Terminal Block on page 4-9.
Recommended
Flat-blade Screwdriver Refer to the "Recommended Flat-blade Screwdriver" of 4-3-5 Recommended Fer-
rules and Crimp Tools on page 4-12.
Current capacity 10 A (per pole)
Number of insertions 50 times
Recommended ferrules
Refer to the "Recommended ferrules" of 4-3-5 Recommended Ferrules and Crimp
Tools on page 4-12.
4-3-3 Nomenclature of the Push-In Plus Terminal Block and Connec-
tions
Nomenclature of the Terminal Block
Connecting Wires with Ferrules and Solid Wires
Release hole
Terminal (Insertion)