http://www.ia.omron.com/
C-1
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
Safety Precautions for All Pushbutton Switches
For the individual precautions for a Switch, refer to the
Safety Precautions
in the section for that Switch.
Do not perform wiring with power supplied to the
Switch. Do not touch the terminals or other charged
parts of the Switch while power is being supplied.
Doing so may result in electric shock.
Do not apply a voltage between the incandescent lamp
and the terminal that is greater than the rated voltage.
Doing so may damage the lamp or LED and cause the
Operation Unit to pop out.
Always turn OFF the power and wait for 10 minutes
before replacing the incandescent lamp. If the lamp is
replaced immediately after the power is turned OFF,
the remaining heat may cause burns.
For details, refer to the
Precautions for Correct Use
in the
Technical Guide for Pushbutton Switches
.
WARNING
Caution
Precautions for Correct Use
