Pushbutton Switch
A16
G-29
Push
bu
tto
n
Switch
es
■
Panel Cutouts
Solder Terminals
Note: 1.
Make sure the thickness of the mounting panel is between 0.5 and 3.2 mm. If, however, a Switch Guard or Dust Cover is used, the thick-
ness of the mounting panel must be between 0.5 and 2 mm.
2.
If the panel is to be finished with coating, etc., make sure that the panel meets the specified dimensions after coating.
PCB Terminals
Note: 1.
Ensure that the variation in the distance between the centers of neighboring mounting holes is less than
±
0.1 mm.
2.
Make sure the thickness of the mounting panel is between 0.5 and 3.2 mm. If, however, a Switch Guard or Dust Cover is used, the thick-
ness of the mounting panel must be between 0.5 and 2 mm.
3.
If the panel is to be finished with coating, etc., make sure that the panel meets the specified dimensions after coating.
24 min.
19 min.
16 dia.
+0.2
0
19 min.
16 dia.
+0.2
0
19 min.
Rectangular A16
@
-J/M16
@
-
@
J
(Top View)
Square A16
@
-A/M16
@-A
Round A16
@
-T/M16
@-T
(Top View)
24 min.
24 min.
16 dia.
+0.2
0
24 min.
16 dia.
+0.2
0
24 min.
Rectangular A16
@
-J/M16
@-J
(Top View)
Square A16
@-A/M16@-A, A165@-BA, M165-BA
Round A16
@
-T/M16
@-T
(Top View)
