![background image](http://html1.mh-extra.com/html/omron/3g3ax-mx2-crt-e/3g3ax-mx2-crt-e_user-manual_740779063.webp)
3 - 5
3 Network Startup
CompoNet Communications Unit User’s Manual (I582-E1)
3-1 In
verter C
onfigu
ra
tion
3
3-
1-1 Basic and
Extende
d Speed I/O Settings
Inverter parameters A001 and A002 set Frequency reference selection and RUN command selection.
When P046 is set to 0 (Basic Speed I/O), 1 (Extended Speed I/O), or 7 (Extended Speed and Accelera-
tion Control), set these parameters according to the following table.
Destination Selection Parameter Settings
Destination Selection Parameter Settings
Precautions for Correct Use
Precautions for Correct Use
To switch the Control Method using the REF (Net.Ref.) or CTR (Net.Ctrl.) bit signal, set as fol-
lows.
• Set the Control Method to which you want to switch in parameter A001/A002.
Be sure to cycle the power supply of the MX2/RX-series Inverter to enable the changes.
Precautions for Correct Use
Precautions for Correct Use
• Be sure that the POWER LED indicator is not lit when cycling the power supply of the
MX2/RX-series Inverter. Note that the time until the light turns off varies with the inverter
model.
• Some CompoNet Master Units in market may send Idle messages during specific events
(start-up, PLC program mode, etc). In this case, consider to set Operation at Idle Mode
Detection Setting (P048) to 02 (Ignore).
Frequency Reference/RUN Command Settings
Parameter
Description
Setting
A001
1st Frequency Reference Selection
04: Option
A002
1st RUN Command Selection
Parameter
Description
Setting
A001
1st Frequency Reference Selection
05: Option 2
A002
1st RUN Command Selection
Bit
Name
Description
CTR
Net.Ctrl.
0: Follow the setting of parameter A002.
1: Follow the reference from network.
REF
Net.Ref.
0: Follow the setting of parameter A001.
1: Follow the reference from network.
Restarting the Inverter
Summary of Contents for 3G3AX-MX2-CRT-E
