Omron 257553, User Manual

Page: 26 / 92

Saving Setup Data
24
ZG2-DSU User’s Manual
Saving Setup Data
Bank settings and system settings made on the Data Storage Unit can be saved internally
on the Data Storage Unit.
•The settings of all banks are saved regardless of the currently selected bank No.
•After you have made settings, be sure to save the setup data. All settings will be deleted if you
turn the power OFF without saving the data. A message prompting you to save data will be
displayed if you change the operation mode without saving data after you have changed
settings.
1
Switch to the FUN mode.
2
Select [SYSTEM].
3
Select [SAVE].
4
Select [OK].
The final confirmation message is
displayed.
5
Select [OK].
The settings are saved, and the
"SYSTEMDATA SAVE Executed"
message is displayed.
Important
TEACH
RUN FUN
3 BANK
2 I/O SET 1 SOURCE
4 SYSTEM
3 INIT
2 SAVE
1 EJECT
←→
1 OK
Save the data?
2 CANCEL
1 OK
Is it all right?
2 CANCEL
Executed
SYSTEMDATA SAVE