6
HS-360X Four-Slot Spare Battery Charger Quick Start Guide
LED Indicators
Troubleshooting
If the charger does not work after following the previous procedures:
• Check the system power.
• Check for loose cable connections.
• Check that batteries are inserted properly in the charger.
Maintenance
• Protect the charger from temperature extremes.
• Do not store or use the charger in any location that is extremely dusty, damp,
or wet.
Use a soft cloth to clean the charger. If the surface of the charger becomes soiled,
clean it with a soft cloth moistened with a diluted window-cleaning solution.
Power/Charging LED Sequence
Standard Use
Red, amber, green, off (all four LEDs)
Power up
Off
Idle
Battery Indications
Amber (blinking)
Charging
Amber (stays on)
Pre-charging
Green (stays on)
Fully charged
Amber (fast blinking)
Charging error
Battery End of Life Indications
Red (blinking)
Charging
Red (stays on)
Fully charged
Red (fast blinking)
Charging error
Maintenance Indications
Red (stays on; all four LEDs)
Enter bootloader
Red blinking (all four LEDs)
Firmware installation
CAUTION
Do not pour, spray, or spill any liquid on the charger.
