AIR COOLED CHILLERS
RIGGING INSTRUCTIONS
34
ATTENTION TO RIGGERS
Hook rigging sling thru holes in base rail, as shown below.
Holes in base rail are centered around the unit center of gravity.
Center of gravity is not unit center line.
Ensure center of gravity aligns with the main lifting point before lifting.
Use spreader bar when rigging, to prevent the slings from damaging the unit.
CAUTION
All panels should be in place when rigging.
Care must be taken to avoid damage to the coils during handling.
Insert packing material between coils & slings as necessary.
MODELS: OALC 010 - OALC 070
MODELS: OALC 080 - OALC 180
MODELS: OALC 200 - OALC 240
LIFT
LIFT
MUST BE 3" NOMINAL PIPE THROUGH UNIT
FOR SLINGS TO AVOID BASE DAMAGE.
PROPER CLEARANCE
TO BE PROVIDED
SPREADER BAR
LIFT
LIFT
MUST BE 3" NOMINAL PIPE THROUGH UNIT
FOR SLINGS TO AVOID B ASE DAMAGE.
PROPER CLEARANCE
TO BE PROVIDED
SPREADER BAR
LIFT
LIFT
MUST BE 3" NOMINAL PIPE THROUGH UNIT
FOR SLINGS TO AVOID BASE DAMAGE.
PROPER CLEARANCE
TO BE PROVIDED
SPREADER BAR
