COMPONENTS -
ENGLISH
Don’t begin the installation before you have read and thoroughly understood the
instructions.
We highly recommend that a qualified professional install this product.
Make sure that the wall you plan to use will safely support four times the combined
weight of the mounted equipment, including its accessories.
Under no circumstances should this product be mounted to metal framing studs.
Never exceed the maximum load capacity of 56.7kg (125lbs).
fig. 1
INSTALLATION TOOLS:
Electronic stud finder (wooden stud installation only)
Variable speed electric drill
Hammer drill (concrete installations only)
Drill bits: 8mm drill bit (wooden stud installation only)
14mm drill bit (concrete installation only)
Hammer (concrete/masonry installation only)
Ratchet wrench with 17mm socket and a
Philips screwdriver.
COMPONENTS
ID
Description
a)
Wall plate
b)
Wall plate cover
c)
Cable covers
d)
Mounting head
e)
Arm assembly
PARTS LIST
ID
Description
Qty.
1
Mounts
1
2
Adaptor plate
1
3
Template
1
A
6mm Allen wrench
1
B
Square metal pad
4
C
Phillip screws M4x35mm
4
D
Phillip screws M4x45mm
4
E
Phillip screws M5x35mm
4
F
Phillip screws M5x45mm
4
G
Phillip screws M6x35mm
4
H
Phillip screws M6x45mm
4
I
Phillip screws M8x35mm
4
J
Phillip screws M8x45mm
4
K
Phillip screws M10x16mm 4
L
Spacer 1
4
M
Spacer 2
4
N
Wall anchors
7
O
Lag bolts: 3/8” x 3 1/2”
7
P
Phillips screws M6x30mm 4
Q
Phillips screws M5x30mm 4
R
Cylindrical spacer
6
S
Metal washer
7
T
5mm Allen wrench
1
DETERMINE THE MOUNTING LOCATION
To provide maximum viewing flexibility, the M7232 is capable of a wide range of
motions, which allows the display to be positioned for viewing from many different
angles.
When selecting the mounting location for the display, make sure there is adequate
space on all sides of the display. Consider the dimensions (Height x Width) of your
particular display model.
MOUNTING TO THE WALL
First remove end panel, from the wall plate: turn Philips screws counter-clockwise with
a screwdriver, and then remove the wall plate covers. Turn socket screws
counter-clockwise with the 5mm Allen wrench. When the screws are loose you will
be able to remove the end panel from the wall plate (as shown in fig. 2).
STEP 2
STEP 1
fig. 2
A
Follow the instructions based upon your
mounting surface:
2a) Wooden Stud
2b) Concrete/masonry
2c) Cinder block
