OMP 60

 

Specifications: 

 

Wing Span: 60 inches

 

Length: 60 inches

 

Power: Hacker A50-14S

 

(or equivalent)

 

Battery: 3800 6-cell LiPo

 

ESC: 80 amp

 

Flying Weight: 5.25 - 5.75 lbs 

 

OHIO MODEL PRODUCTS

 

199 Stratford Lane

 

Xenia, Ohio 45385

 

(937) 372-0603

 

www.ohiomodelplanes.com

email: 

[email protected]

  

 

All contents copyright 2015, Ohio Model Products

  

Version 2.0,  January 2015

 

 
Dear OMP Customer, 

Thank you for purchasing the new OMP/EG electric aerobatic aircraft.  This manual covers the Yak-55M 
electric aircraft. Ohio Model Products is known worldwide for the best profile aircraft designs around and 
many innovative construction techniques.  We’ve taken this expertise and teamed up with EG Aircraft to 
bring this new model to the radio control enthusiasts. The new 60" Electric Yak-55M is a state of the art 
all out 3D machine for the most ardent 3D flyers.  With a Hacker A50-14S or equivalent motor and a 6 
Cell Lipo and supplied side force generators, the Yak can do any 3D maneuver you can think of plus 
some. The OMP Yak comes with carbon fiber main and tail wheel landing gear assemblies, wing tube, 
battery tray and plastic spinner. The plane is also covered in Ultracote in two different color schemes.  

 Sincerely, 

                                                                  John Drake and Bradley Petty 
 
 

A QUICK WORD ABOUT SAFETY AND RADIO CONTROL FLYING MODELS 

 

With radio control aircraft, like any hobby or sport, there are certain risks.  The operator of these 

models is responsible for these risks.  If misused or abused, you may cause serious bodily injury and/or 
damage to property.  With this in mind, you will want to be certain that you build your model carefully 
and correctly.  If you are not an experienced flier, have your work checked and ask for help in learning to 
fly safely.  

This model aircraft is not a toy

 and must be operated and flown in a safe manner at all 

times.  Always perform a pre-flight check of the model including all control surfaces, proper function of 
the radio gear, structure, radio range, and any other area relating to the safe operation of this aircraft. 
  
    Models are not insurable but operators are.  You can obtain coverage through membership in the 
Academy of Model Aeronautics (AMA).  For an AMA information package call 1-800-435-9262, ext. 
292 or visit the AMA website at "

www.modelaircraft.org

". 

 

 

Summary of Contents for 60" Yak-55M













Reviews: