10304055_EF.DOC
11/20
CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Please note:
This fuse is being used for both 115 V and 230 V.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Open the fuseholder on the rearpanel with a fitting screwdriver.
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
230 V AC, 50 Hz
Power consumption:
18 W
Slope:
24 dB / octave
Operation-modes:
2-way-stereo or 3-way-mono
Input:
Mono/stereo
Input impedance:
> 30,000 Ohms
Input jacks:
1/4" jack socket balanced and unbalanced
Output:
Mono/stereo
Output impedance:
500 Ohms
Output jacks:
1/4" jack socket balanced and unbalanced
Frequency range:
100 Hz - 10,000 Hz
Control range:
- ~ to + 6 dB
Dimensions:
483 x 44 x 160 mm
Weight:
2 kg
Fuse:
T 0,25 A, 250 V
Please note: Every information is subject to change without prior notice. 09.01.2003 ©
Summary of Contents for XO-2300
Page 2: ...10304055_EF DOC 2 20 ...
Page 7: ...10304055_EF DOC 7 20 ...
Page 10: ...10304055_EF DOC 10 20 ...
