00075263.DOC, Version 1.0
31/36
6. OPERATION
The operation of the two players is identical.
Switching on/off
1
Switch on the
XCP-2800MT
with the
power button.
• The unit will automatically detect if a CD is
inserted (indication "LOAD CD“).
• If a CD is inserted, the display will shortly
indicate the total number of titles and the
total remain time followed by information
concerning the first title after the read-in.
• If no CD is inserted "NODisc" will be
displayed.
2
Prior to switching the unit off, always
terminate the playback with the button [
►
II
]
or the button [
]. Then press the power
button to switch off the unit.
Inserting a CD
1
To insert a CD, open the CD tray with the
button [ ].
• The control LED lights.
• The display will show "OPEN".
2
Insert the CD with the lettering facing
upwards and close the CD tray again with
the button [ ].
• The display will show "CLOSE".
• The control LED flashes during the read-in
Selecting titles
1
For selecting titles use the buttons [
] and
[
] which allow to skip one title or several
titles in forward or backward direction.
• Each time the button [
] is pressed, the unit
will advance one title.
• By pressing the button [
], the unit will go to
the beginning of the title and with each
further actuation, the unit will go back
another title.
2
By pressing the button [
+10
], the unit will
advance 10 titles.
Selecting the operating mode
In continuous play mode, all titles of are played
one after the other. Press the button SINGLE to
switch to single title play. Then the unit is set to
pause at the start of the next title after playing a
title and indicates "SINGLE".
Starting playback/pause
1
Press the button [
►
II
], to start playback.
• During playback, the blue LED lights and the
display indicates
►
.
•
The starting point of the title will
automatically be stored in the memory as the
cue point. The unit will return to this cue
point by shortly pressing the button CUE.
2
Playback can be interrupted at any time with
the button [
►
II
].
• The display indicates
II
and the blue LED
starts flashing.
• To continue, press the button [
►
II
] once
again.
• Pressing the button CUE during playback
also interrupts the playing and returns the
title to the cue point.
Fast forward and reverse
For fast forward or reverse on the player, first
activate the search function for the jog dial by
shortly pressing the button JOGMODE.
• The button's control LED lights blue.
Then turn the jog dial in the corresponding
direction.
• The fast forward/reverse speed depends on the
turning speed of the dial.
• In pause or cue mode the current spot is
constantly repeated after fast forward or reverse
until playback is started with the button [
►
II
].
Switching over the time indication
As a basic setting, the display will show the
elapsed time of the current title (indication
“ELAPSED”) numerically in minutes, seconds and
frames (1 frame = 1/75 second).
1
With the button TIME the time indication can
be switched over:
• first actuation of the button: remaining title
time (indication "REMAIN")
•
second actuation of the button: total
remaining time (indication "TOTAL REMAIN")
• third actuation of the button: basic setting
(indication “ELAPSED”)
2
In addition to numerical time indication, the
playing time is indicated graphically by the
length of the bargraph.
• When set to ELAPSED, the number of
segments of the bargraph will be increased
with increased playing time.
