background image

 

00074635.DOC, Version 1.0 

16/17

7. PROBLEM CART 

 

PROBLEM 

REMEDY 

No power. 

  Check connection cable of power unit and any extension cables. 

No sound; receiver RF 
indication does not light. 

  Make sure transmitter and receiver are switched on. 

  Check receiver battery indication to ensure that batteries are providing power. 

Replace batteries if necessary. 

  Make sure that receiver is in line of sight of transmitter. If necessary, reduce 

distance between transmitter and receiver. 

No receiver sound; 
receiver RF indication 
lights. 

  Turn up the level on receiver and/or pocket transmitter. 

  Check for proper connection between transmitter and mixer/amplifier. 

  Apply signal to transmitter and observe receiver's RF indication. If it lights up, 

the problem is elsewhere in the sound system. 

Received signal is noisy 
or contains extraneous 
sounds with transmitter 
on. 

  Check transmitter's battery indication to ensure that battery is providing power. 

  Remove local sources of HF interference, such as lighting equipment. 

  Two transmitters may be operating on the same frequency. Locate and turn 

one off. 

  Signal may be too weak. If possible, move receiver closer to transmitter. 

Noise from receiver with 
transmitter off. 

  Remove local sources of HF interference, such as lighting equipment. 

  Reposition the receiver. 

Momentary loss of sound 
as receiver is moved 
around performing area. 

  Reposition transmitter and perform another test and observe RF indication. If 

audio drop-outs persist, mark dead spots in performing area and avoid them 
during performance. 

 

8. CLEANING AND MAINTENANCE 

 

Disconnect from mains before starting maintenance operation!

DANGER TO LIFE!

 

 
We recommend a frequent cleaning of the devices. Please use a soft lint-free and moistened cloth. Never 
use alcohol or solvents! 
 
There are no serviceable parts inside the devices except for the batteries on the receiver. Maintenance and 
service operations are only to be carried out by authorized dealers. 
 
Should you need any spare parts, please use genuine parts. 
 
Should you have further questions, please contact your dealer. 
 

Summary of Contents for UHF-201


















Reviews: