00061965.DOC, Version 1.1
62/74
7.4 Basic adjustment of the mixer
Virtual DJ
TMC-3
1
For basic adjustment set the master controls [
MASTER CONTROL
], the [
CROSSFADER
] and in both
channels the [
GAIN
] controls and the [
TONE
] controls to mid-position.
2
With the input selector buttons [
PC/LINE
] select the desired signal source for Deck A and Deck B:
•
MIDI mode
(red LED off): the audio signal coming via the USB connection serves as signal source
•
analog mode
(red LED lights): the analog line/phono input serves as signal source
3
Advance the two [
CHANNEL FADERS
] approx. to 2/3 of the maximum for sufficient way for fading in
and out.
4
Play a title with Deck A or feed an audio signal to Deck A and control the deck with the respective
[
GAIN
] control according to the level indication. An optimum level control is obtained if level values in
the 0 dB range are shown at average volume. If the red LEDs of the [
OUTPUT METER
] light up, there
is an overload of the channel. Stop the playback on Deck A or on the external unit and adjust Deck B in
the same way.
5
Adjust the desired sound with the tone controls of the channel. By adjusting the three tone controls, the
high frequencies (control [
HIGH
]), the midrange frequencies (control [
MID
]), and the low frequencies
(control [
LOW
]) can be boosted or substantially attenuated. With the controls in mid-position, the
frequency response is not affected. Sound adjustments affect the level. Readjust the channel level with
the [
GAIN
] control, if necessary.
6
Adjust the low frequencies for the output signal at the balanced master output with the control [
BASS
LEVEL
].
7
Adjust the definite level of the output signal at the master outputs with the controls [
MASTER
CONTROL
] and [
MASTER LEVEL
].
8
Adjust the desired signal level for the output [
BOOTH
] with the control [
BOOTH VOLUME
].
9
The recording signal at the recording output [
REC
] is taken off ahead of the output controls, i.e. it is not
affected by the controls [
MASTER CONTROL
], [
MASTER LEVEL
] and [
BOOTH VOLUME
].
