15
•
EN
10
Channel faders
Level controls for the respective input channel.
11
Crossfader
For crossfading between two of the input channels selected with the
assignment switches. In mid-position, both channels can be heard
at the same volume.
12
LCD screen for the audio
player
Shows the playback source and elapsed time as well as scrolling
text information about the current track and total remaining time in
USB mode.
13
USB port
For connecting a USB storage device.
14
MODE button
For switching between USB device, Bluetooth and PC signal.
15
and
button
For title selection and fast forward/rewind.
16
PLAY/STOP
For playback control.
17
PAIRING button
For pairing/unpairing Bluetooth devices.
18
MASTER LEVEL control
Level control for the master signal at the master outputs.
19
CUE MIX control
For selecting and crossfading the monitoring signal for the
headphones output
• left position: the prefader level of the input channel of which the
button CUE is pressed is monitored.
• right position: the music program currently playing is monitored
ahead of the master control
20
BALANCE control
For adjusting the balance left/right of the stereo channels.
21
Cue LEVEL control
Level control for the headphones output
22
BOOTH LEVEL control
Level control for the monitor output
23
Output level LED meter
10-digit LED meter of the master signal within the range of -13 dB to
+3 dB.
24
Headphones outputs
3.5 mm/6.3 mm jacks for connecting stereo headphones. Turn the
level control (21) down before plugging in any headphones, as
sudden high-volume impact may damage your ears.
25
Line inputs 2-7
Stereo inputs LINE (RCA) for channel 1 to 4 for connecting units
with line level outputs (e.g. CD players).
26
Power switch
Turns the unit on and off.
27
Power input
Plug in the supplied power cable here.
28
Master output, bal.
Stereo master output (XLR) for connecting an amplifier.
29
Master output, unbal.
Stereo master output (RCA) for connecting an amplifier.
30
BOOTH output
Stereo RCA output carrying the booth output signal; for connecting
a further amplifier e.g. for the monitoring system.
31
REC output
Stereo RCA output for connecting an analog recording unit. The
recording level is independent of the position of the master
control
32
PC USB port
USB-B port (full-duplex) for connecting a computer.
• Can be used simultaneously as an input for digital audio signals for
playback via channel 4 and as output of the digital master
signal.
• The digital master level is independent of the master control.
• The digital master signal is constantly available, i.e. it is
independent of the input selector.
33
Phono/line inputs
Stereo inputs (RCA) for channel 1-2 for connecting units with line
level outputs such as CD players or turntables with magnetic
system
.
Set the adjacent line/phono switch according to the source
used.
34
Ground clamping screws
To be used for turntables.
Summary of Contents for PM-444Pi
Page 1: ......
