14
•
EN
4
Operating Elements and Connections
No.
Element
Function
1
DJ MIC input
Balanced XLR input for connecting a DJ microphone.
2
GAIN control
Volume control for the DJ microphone.
3
HIGH, LOW tone controls
Allows the adjustment of the high and low range for the DJ
microphone.
4
Microphone selector
On/off switch with LED indicator for the microphone. Select
TALKOVER to attenuate the level of channel 1-4 in case of
microphone announcements.
5
Input source selector
Selects the input source to be used with the respective input
channel.
6
GAIN control
For adjusting the input amplification for the respective input channel.
The adjacent LED meter indicates the channel level ahead of the
channel fader.
7
HIGH, MID, LOW tone
controls
Allows the adjustment of the high, mid and low range for the
respective input channel.
8
CUE assign switch with LED
Assigns the respective channel to the headphone bus for pre-fader-
listening by means of the headphone output. The LED indicates the
pressed position.
9
Crossfader
assignment
switches
Allows to send the respective channel’s signal either directly to the
master bus, or to the left side of the crossfader when set to position
“A”, or to the right side of the crossfader when set to the position
“B”. When all input channels are assigned directly to the master
bus, the crossfader is disabled and the desired volume ratio can be
set with the channel controls.
Summary of Contents for PM-444Pi
Page 1: ......
