10006750_V_1_1.DOC
25/28
26. MONO / STEREO-SWITCH
Used to set the master output to mono or stereo. If you connected a mono-signal via one RCA-socket, you
can switch the output signal to STEREO in order to have a stereo output signal.
27. EQ TO BOOTH-SWITCH
Press this button and the EQ settings affect the BOOTH signal as well.
28. 7-BAND GRAPHIC EQUALIZER
Used to fine-tune the master output. The frequencies are as follows: 60 Hz, 100 Hz, 400 Hz, 1 KHz, 2,4 KHz,
6 KHz and 15 KHz. They can be adjusted by +/- 12 dB.
29. MASTER LEVEL / CUE-DISPLAY
The display shows the level of the left and right master output and the level of the channel currently being
cued. Note that it does not affect the record and booth outputs. Reduce GAIN if the red LEDs light up. This
indicator is a warning that the signal is approaching clipping and that distortion may result if the level
increases further.
30. GAIN-CONTROL
Used to set the level of the individual input signal. If the CUE-Button is active and the CUE MIXING FADER
is in the CUE position, you can monitor the signal level via the CUE LED-METER. Reduce GAIN if the red
LEDs of the Master Level/Cue-Display light up.
