21
•
EN
1) As signal source, audio units with line level output (e.g. mixer, preamplifier) can be connected to the
inputs via XLR and 6.3 mm plugs, balanced and unbalanced. The inputs are designed for stereo signals
(R = right channel, L = left channel). When connecting a mono device, only use the left jack and activate
mono operation by depressing the operating mode selector switch.
2) Alternatively, unbalanced RCA jacks are provided for connecting the signal source. If the output level of
the signal source at this input is too low, depress the level switch for internal level boosting.
3) Connect the satellite speakers to the speaker connectors of the subwoofer using the included connection
cables. For locking the connection turn the plug to the right. For unlocking pull the unlock button and turn
the plug to the left and pull it out of the socket.
4) At the balanced XLR outputs LINK OUT the input signal fed through is available. This output allows
connecting the input of another active speaker system for additional PA applications.
5) Finally, connect the supplied power supply cable to the corresponding input and the mains plug to an
outlet (230 V~, 50 Hz).
SPEAKER L
L
IN
K O
U
T
IN
P
U
T
L
R
SPEAKER R
L
R
SAT LEVEL
SUB LEVEL
BLUETOOTH
LIMIT
SIGNAL
POWER
DSP PRESET
FLAT
DJ
LIVE
XLR
MAXX-1508DSP
2.1 ACTIVE SYSTEM
MONO
STEREO
MIN
MAX
MIN
MAX
5V/2A
CHARGER
INPUT
+5dB
0dB
SENSITIVITY
