10355075_V_1_0.DOC
8/11
USER MANUAL
LH-075 Tube mic preamplifier
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
For your own safety, please read this user manual carefully before you initial start-up.
Every person involved with the installation, operation and maintenance of this device has to
- be qualilfied
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet
INTRODUCTION
Thank you for having chosen an OMNITRONIC LH-075. If you follow the instructions given in this manual,
we are sure that you will enjoy this device for a long period of time.
Unpack your LH-075.
Before you initial start-up, please make sure that there are no transport damages. Should there be any, do
not take the device into operation and immediately consult your dealer.
Features
Mic preamplifier
• For connecting a microphone via XLR-socket or jack socket
• Signal output via XLR-plug or jack socket
• Gain-control
• Clip LED
• Phantom-power can be switched
• Limiter can be switched
• Phase Reverse
• Gain +20 dB switch for low-level mics
• Drive-control
• Output LED-level-meter with Peak-LED
• Power supply via power unit
• Modern convex housing design
• Full-rubber-housing corners for safe operation
• Cables can be routed under the housing
