10355075_V_1_0.DOC
11/11
• Connect your mixer to the XLR mounting-plug (OUTPUT BAL).
Balanced XLR mounting-plug:
1: Ground
2: In Phase (+)
3: Out of Phase (-)
1
2
3
• You can connect your stereo headphone to the jack-socket (OUTPUT UNBAL).
Stereo 1/4“ jack-plug:
Tip
Right
Left
Ground
Ring Sleeve
• Connect the connection cable of the power-unit with the AC IN-socket. Plug the power unit into your outlet
(Power-LED on).
• If you want to add phantom power to your microphone, press the PHANTOM POWER-botton.
• By turning the GAIN-control you can set the level of the input signal.
• The Clip-LED flashes when the output signal starts distorting.
CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
9 V AC, 500 mA
via power-unit included in the delivery
Power consumption:
4.5 VA
Frequency range:
10 Hz - 20 kHz
Input impedance:
2 kOhms (XLR), 840 kOhms (1/4")
Output impedance:
600 Ohms (XLR), 300 Ohms (1/4")
Maximum output level:
28 dBu (XLR), 22 dBu (1/4")
Maximum input level:
14 dBu (XLR), 22 dBu (1/4")
Dynamic range:
>100 dB
Input Connectors:
XLR and jack mounting sockets
Output Connectors:
XLR and jack mounting plugs
THD:
0.1 %
Dimensions:
150 x 130 x 60 mm
Weight:
0.5 kg
Please note: Every information is subject to change without prior notice. 06.04.2005 ©
