17
7. REPLACING THE CROSSFADER
Instructions for replacing the crossfader:
• Remove the fader knob.
• Remove the two outer screws on the fader-panel.
• Take the fader out and unplug the connection-cable.
• Connect the new fader and fix it in the device.
The fader-panel of the replacement-crossfader cannot be used for the Design-version. In order to exchange
the fader-panels, additionally unscrew the 2 inner screws and exchange the two fader-panels.
8. TECHNICAL SPECIFICATIONS
Power supply:
230 V/50 Hz
Via AC 10 V power-unit included in the delivery
Power consumption:
10 W
Inputs:
2 phono, 2 line, 1 mic
Minimum input voltage:
Microphone:
1.1 mV
Phono:
2.5 mV
Line:
75 mV
Output power:
11.3 V (peak to peak)
Outputs:
1 Master-Out, 1 Rec-Out via RCA
Frequency range:
20 - 20,000 Hz, ± 3 dB
Distortion:
< 0.05 %
S/N-ratio:
60 dB (1 KHz)
Talkover-attenuation:
-14 dB
Kill-function:
Treble/Middle/Bass:
-40 dB
Headphones impedance:
8 Ohms
Dimensions:
254 x 175 x 56 mm
Weight:
1.7 kg
Replacement crossfader:
No. 10007190
Please note: All specifications are subject to change without prior notice.
12/98
©
Errors and omissions excepted.
