00061252.DOC, Version 1.0
15/15
6. CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents! There are no serviceable parts inside the device except for the fuse. Maintenance and
service operations are only to be carried out by authorized dealers.
6.1 Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead. Procedure:
Step 1:
Open the fuse holder on the rear panel with a fitting screwdriver.
Step 2:
Remove the old fuse from the fuse holder.
Step 3:
Install the new fuse in the fuse holder.
Step 4:
Replace the fuse holder in the housing.
Should you need any spare parts, please use genuine parts. If the power supply cable of this device
becomes damaged, it has to be replaced by a special power supply cable available at your dealer. Should
you have further questions, please contact your dealer.
7. TECHNICAL SPECIFICATIONS
Power supply:
230 V AC, 50 Hz ~
Power consumption:
10 W
Inputs:
2 x XLR, balanced
2 x RCA, unbalanced
Maximum input level:
+22 dBu
Outputs:
2 x XLR, balanced
2 x RCA, unbalanced
Maximum output level:
+22 dBu
Lows:
75 Hz
Mids:
300 Hz, 1 kHz
Highs:
3 kHz, 10 kHz
Control range:
±12 dB
Frequency range:
20-20000 Hz
Dimensions (WxDxH):
483 x 125 x 44 mm
Weight:
2 kg
Please note: Every information is subject to change without prior notice. 10.06.2011 ©
