00061252.DOC, Version 1.0
13/15
4. OPERATING ELEMENTS AND CONNECTIONS
1
Power switch with indicator
Turns power to the unit on and off. When powered on, the
indicator lights up.
2
Tone controls
For boosting and attenuating the respective frequency
band level within a range of ±12 dB. The bass range can
be used to create acapella effects. The midrange allows
to cut vocals and melody from the source material and
the high range can be used to emphasize the sound of
the cymbals or hi-hats.
• control 75 Hz: bass range
• control 300 Hz: lower midrange
• control 2 kHz: higher midrange
• control 3 kHz: lower
high range
• control 10 kHz: higher high range
6
Line output, unbalanced
Unbalanced stereo output (RCA) for connecting a
subsequent units with line level (e.g. PA amplifier).
7
Power input with fuseholder
• Plug in the supplied power cable here.
• Only replace the fuse when the device is disconnected
from mains. Only use fuses of the same rating and
power. The correct fuse value is specified on the rear
panel.
3
Line input, unbalanced
Unbalanced stereo input (RCA) for connecting a signal
source with line level (e.g. mixer or preamplifier).
4
Line input, balanced
Balanced stereo input (3-pin XLR) for connecting a signal
source with line level (e.g. mixer or preamplifier).
5
Line output, balanced
Balanced stereo output (3-pin XLR) for connecting a
subsequent units with line level (e.g. PA amplifier).
