34
Turn the press control [
VOL/SEL
], to adjust
the hours. Switch to minutes with the button
[
CLK
] (the minutes are flashing) and adjust
the value with the press control [
VOL/SEL
].
Press the press control [
VOL/SEL
], to exit
the adjusting mode. The setting procedure
will also be stopped if the control is not
actuated for 5 seconds.
Reset to Default Settings
If the unit fails to operate properly, press the
button [
REST
]. All personal settings will be
deleted and the unit returns to factory settings.
Tuner
Switch to tuner operation with the button [
MODE
].
The display shows the station number last
selected and the corresponding receiving
frequency. If a program is transmitted in stereo,
the indication
appears in the display.
Station tuning, storing, and calling
The tuner is able to receive FM and medium wave
stations. The FM band is divided into three
identical subbands (F1, F2, F3) and the medium
wave band into two (AM1, AM2). In each subband
six stations can be stored, i.e. a total of 18 FM
and 6 medium wave stations.
1
Switch to the desired FM or medium wave
band with the button [
BAND
].
2
For station tuning, automatic or manual
station finding can be used:
• Long actuation of the button [
▲
] (forwards)
or [
▼
] (reverse) starts automatic station
finding. The station finding stops as soon as
a station is found. Start the station finding so
many times until the desired station will be
received.
• For manual fine tuning, shortly press the
button [
▲
] or [
▼
] to increase or reduce the
received frequency step by step (in the FM
band by 50 kHz, in the medium wave band
by 9 kHz).
3
To store a station, keep the desired [
station
button 1 to 6
] pressed until the station
number appears on the right side next to the
received frequency.
4
Stations with good reception can also be
stored with the automatic station memory.
Long actuation of the button
[
A/PS
]
starts the
automatic station memory. The automatic
station memory will be running forward and
stop at the next station for 5 seconds.
Afterwards, the automatic station memory
will be running to the next station.
Stations will only be stored in the selected
band. When 6 stations that can be received
are stored in the memory, automatic station
memory closes.
To cancel the automatic station memory,
shortly press [
A/PS
]. Afterwards, you can
keep on listening to the station.
5
To call a stored station, select the
corresponding band with the button [
BAND
]
and press the station button of the station.
