10355070_V_1_0.DOC
11/11
OPERATION
Inserting/Replacing the battery
Please refer to the explanations under Operating Determinations.
Open the battery cover on the bottom and remove it.
If replacing the battery, remove the old battery from the battery compartment.
Leaky or damaged batteries might cause cauterisation when in contact with the skin; therefore, use suitable
protective gloves.
Caution!
Danger of explosion when battery is replaced improperly.
Only replace by the same type or similar types recommended by the manufacturer.
Remove empty battery in accordance with the instructions of the manufacturer.
Insert the battery and make sure that the poles are correct.
Replace the battery cover and close it.
If the device will not be used for a longer period of time, remove the battery in order to avoid battery leakage.
In order to have a long battery life, you should only use alcaline batteries.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the battery. Maintenance and service operations
are only to be carried out by authorized dealers.
In order to replace the battery please refer to "Inserting/exchanging battery".
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
1 standard 9 V battery
Current consumption:
approx. 65 mA
Battery life:
6 - 8 hours
Frequency range:
10 Hz - 30 kHz
Input impedance:
470 kOhms
Output impedance:
600 Ohms
Maximum output level:
6 dBu
Dynamic range:
>100 dB
Hi Cut:
10 kHz
Input Connectors:
XLR mounting sockets
Output Connectors:
XLR mounting plugs
THD:
0.5 %
Dimensions:
150 x 130 x 60 mm
Weight:
0.5 kg
Please note: Every information is subject to change without prior notice. 06.04.2005 ©
