Omnitronic DD-5250 User Manual Download Page 4

10603004X31NXS_V_1_0.DOC

18/43

• Two large Start/Stop-buttons
• Start/Stop-time individually adjustable
• Separate LED target lamp (stackable)
• Adjustable anti-skating
• Shock-absorbing feet
• Power cable and RCA-cable detachable
• Recessed connection for easy case-mounting

SAFETY INSTRUCTIONS

CAUTION!

Be careful with your operations. With a dangerous voltage you can suffer a dangerous
electric shock when touching the wires!

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.

Important:

Damages caused by the disregard of this user manual are not subject to warranty. The dealer will
not accept liability for any resulting defects or problems.

Always plug in the power plug least. Make sure that the power-switch is set to OFF position before you
connect the device to the mains.

Keep away from heaters and other heating sources!

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it
on immediately. The arising condensation water might damage your device. Leave the device switched off
until it has reached room temperature.

Never put any liquids on the device or close to it. Should any liquid enter the device nevertheless, disconnect
from mains immediately. Please let the device be checked by a qualified service technician before you
operate it again. Any damages caused by liquids having entered the device are not subject to warranty!

This device falls under protection-class I. The power plug must only be plugged into a protection class I
outlet.

Never let the power-cord come into contact with other cables! Handle the power-cord and all connections
with the mains with particular caution!

Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and the
power-cord from time to time.

Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the
power-cord by the plug. Never pull out the plug by tugging the power-cord.

Before the device is switched on all faders and volume controls have to be set to "0" or "min" position.

CAUTION:

 Turn the amplifier on last and off first!

Keep away children and amateurs!

CAUTION:

 High volumes can cause hearing damage!

There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.

Summary of Contents for DD-5250
















Reviews: