Omnitronic CM-742, User Manual

Page: 19 / 41

19
5. DESCRIPTION OF THE DEVICE
5.1 Frontpanel
12 13 14 15 16
17
18
19
21
22
23
24
25
26
27
28
29
31
32
20
30
1
2
3
4
5
6
7
8
9
10
11
14
MIN
MIN
MAX
MAX
TREBLE
MIC LEVEL
MIN MAX
MIDDLE
MIN MAX
BASS
MIC 1
MIC ON
HEADPHONES
OFF
TALKOVER
POWER
CUE
MIX
EFFECT
OFF
OFF
ON OFF
ON
OFF
12 V LAMP
STEREO
STEREO MONO MONO
L R
BALANCE
0 10
BOOTH
CHANNEL
ASSIGN
1
2 3
4
CHANNEL
ASSIGN
1
2
3
4
BEAT BEAT BEAT BEAT
MASTER-1 MASTER-2 CUE-LEVEL
CUE
SPLIT
1 2
3
MASTER LEVEL
CUE LEVEL
– 20 15 10 7 5 3 1 0 1 3 5 8 +
– 20 15 10 7 5 3 1 0 1 3 5 8 +
L L
L+R L+R
R R
(1) 12 V LAMP
BNC-socket for gooseneck-lamp.
(2) POWER SWITCH
Press this button to start operation.
(3) MASTER LEVEL / CUE DISPLAY
The upper display shows the level of the left and right master output.
The lower display shows the level of the channel currently being cued (CUE LED on).
(4) GAIN-CONTROL
Used to set the level of the input signal.
(5) TREBLE-CONTROL
Used to increase or lower the HIs of the input signal.
(6) MIDDLE-CONTROL
Used to increase or lower the MIDs of the input signal.
(7) BASS-CONTROL
Used to increase or lower the LOWs of the input signal.
(8) PHONO / AUX / LINE / MIC-SWITCH
Used to select the input to be sent to the individual channel.
(9) CHANNEL-FADER
Used to adjust the input level of each channel.
(10) CUE-BUTTON
Use the CUE-button in order to select the channel(s) to be monitored.
(11) BEAT-INDICATOR
The LED lights up at every bass-beat of the respective source. As soon as the LEDs flash
synchronously, the speed of the two sources is synchronized.
(12) CURVE ON/OFF-SELECTOR
With the Curve On/Off-selector, you can between the Crossfader-modes Soft and Sharp. In the Soft-
mode, the Crossfader fades between the channels in a linear, continuous manner. In the Sharp-mode,
the Crossfader works more logarhytmical, i.e. working faster towards the outer edges.
(13) CROSSFADER REVERSE-SELECTOR
With this function, you can invert the Crossfader-channels. If inactive, channel 1 is on the left
Crossfader-side; if active, "2-1" channel 1 is on the right Crossfader-side.
(14) CROSSFADER-START-SELECTOR
Activate this function in order to enble crossfader start.
(15) CHANNEL ASSIGN-SELECTOR
With the CHANNEL ASSIGN-selectors, you can choose which channel is to be mixed with another.
EXAMPLE: Set the left CHANNEL ASSIGN-selector to channel 1 and the right switch to channel 2 in