18
• Via the BOOTH sockets, you can either connect monitor active speakers for the DJ-booth or an additional
amplifier for creating a second zone.
• For recording, connect your tape recorder or cassette deck to the REC OUT-sockets. The REC OUT level
will not be influenced by the master fader. You can set the output level with the channel faders, the tone
controls and the GAIN control.
• The CM-742 features one separately controllable microphone channel (MIC 1). This microphone can be
connected via the XLR mounting-socket on the frontpanel. With the Talkover-selector, you can attenuate the
level of all other signal-sources without affecting the microphone volume.
Occupation balanced XLR-socket:
Balanced XLR-socket:
1: Ground
2: In Phase (+)
3: Out of Phase (-)
1
2
3
• Additionally, the CM-742 features one more ¼" Mic 2 jack plug on the rearpanel. You can adjust the
microphone volume using the and CH-4 fader. Make sure that the MIC 2 /LINE 4-switch is set to MIC 2.
Occupation unbalanced mono-1/4“ jack-plug:
Unbalanced mono 1/4“ jack-plug:
Tip
( )
G
Sleeve
• Via the PHONO / AUX-selector on the rearpanel, you can determine whether you want to connect a record
player (PHONO) or other devices (AUX) to the respective channel. Please set the selector before you install
the mixer in your rack.
• You can connect up to 3 record players using the PHONO 1 sockets, PHONO 2 sockets and PHONO 3
sockets on the rearpanel. You can only control the record player signal after you switched the PHONO /
LINE switches to PHONO. The signal is then controlled via the CH-1, CH-2 and CH-3 faders.
• Connect your tape recorder, tuner, CD-player, cassette deck or all other line signals to the LINE /AUX
sockets on the rearpanel. You can only control the line signals after you switched the PHONO/LINE switches
to line. The signal is then controlled via the respective faders.
• Sound-effectors are to be connected with the EFFECTS-sockets. In this way, you can include additional
sound-effects.
• Connect the device to the mains with the enclosed power supply cable.
