Omnitronic ACS-410BTS, User Manual

Page: 16 / 24

16
3
OPERATING DETERMINATIONS
The ACS-410BTS is an active column PA system with a high-power subwoofer with 2-channel class D
amplifier module and a full-range column speaker for mobile applications. The system offers two mono inputs
(XLR and 6.3 mm jack) for microphones and line sources, one stereo input (RCA and 6.3 mm jack), as well
as one AUX input for portable audio players. You can stream music wirelessly from your mobile devices via
Bluetooth. The amplifier supplies a power of 310 W and 100 W and is protected with a limiter against
overload. The column speaker mounts on top of the subwoofer with the included telescope bar. The
integrated stereo Bluetooth link allows for wireless stereo operation with 2 systems linked together.
Power
This product is allowed to be operated with an
alternating current of 230 V, 50 Hz and was designed
for indoor use only. The occupation of the connection
cables is as follows:
Cable Pin International
Brown Live L
Blue Neutral N
Yellow/Green Earth
The earth has to be connected! If the device will be
directly connected with the local power supply network,
a disconnection switch with a minimum opening of 3
mm at every pole has to be included in the permanent
electrical installation. The device must only be
connected with an electric installation carried out in
compliance with the IEC standards. The electric
installation must be equipped with a Residual Current
Device (RCD) with a maximum fault current of 30 mA.
Public and Industrial Use
Operating an amplification system in public or industrial
areas, a series of safety instructions have to be
followed that this manual can only give in part. The
operator must therefore inform himself on the current
safety instructions and consider them.
Maximum Power
The maximum power of the speaker system must never
be exceeded. When operating the speaker system,
please make sure that the loudspeakers always sound
well. When distortions can be heard, either the amplifier
or the loudspeaker is overloaded. Overloads can
quickly lead to amplifier or speaker damage. In order to
avoid damage, please reduce the volume immediately
when distortions can be heard. When speaker systems
are destroyed by overload, the guarantee becomes
void.
Ambient Conditions
This device must never be operated or stockpiled in
surroundings where splash water, rain, moisture or fog
may harm the device. Moisture or very high humidity
can reduce the insulation and lead to mortal electrical
shocks. The ambient temperature must always be
between -5° C and +45° C. Keep away from direct
insulation (particularly in cars) and heaters. The relative
humidity must not exceed 50 % with an ambient
temperature of 45° C. This device must only be
operated in an altitude between -20 and 2000 m over
NN. When using smoke machines, make sure that the
device is never exposed to the direct smoke jet and is
installed in a distance of 0.5 meters between smoke
machine and device.
Installation
Do not shake the device. Avoid brute force when
installing or operating the device. When choosing the
installation spot, please make sure that the device is
not exposed to extreme heat, moisture or dust. There
should not be any cables lying around. You endanger
your own and the safety of others! This speaker system
must only be installed at a solid, plane, anti-slip,
vibration-free, oscillation-free and fire-resistant location.
Operate the device only after having familiarized with its
functions. Do not permit operation by persons not
qualified for operating the device. Most damages are
the result of unprofessional operation!
Transport
Please use the original packaging if the device is to be
transported.
Cleaning
Never use solvents or aggressive detergents in order to
clean the device! Rather use a soft and damp cloth.
Serial Barcode
Never remove the serial barcode from the device as
this would make the guarantee void.
Modifications and Guarantee
Please consider that unauthorized modifications on the
speaker system are forbidden due to safety reasons! If
this speaker system will be operated in any way
different to the one described in this manual, the
product may suffer damages and the guarantee
becomes void. Furthermore, any other operation may
lead to dangers like crashes, hearing loss etc.