iConverter
XG
User Manual
Product Overview
Product update for firmware revision 1.1.4. Operational change to the self-diagnostic
circuit test.
The iConverter
XG (8599P-xx) is a protocol-transparent fiber media converter
with two pluggable transceiver ports supporting data rates from 6G to 11.32G and
supports the three Rs (regeneration, retiming and reshaping). The XG auto-detects
the speed of the installed transceiver.
The XG supports power level 1 and 2 SFP+/XFP transceivers as indicated in the table
below. To support higher power level transceivers, use the XG+ (8599R-xx) module.
The XG requires management module firmware to be version 5.2.30 or higher
and NetOutlook SNMP Management Software to be version 5.3.16 or higher.
Port 2 - SFP+
Port 2 - XFP
Power
Level 1
Power
Level 2
Power
Level 3 or 4
Power
Level 1
Power
Level 2
Power
Level 3 or 4
Port 1
SFP+
Power
Level 1
8599P-00
x
x
8599P-01 8599P-01
x
Power
Level 2
x
x
x
x
x
x
Power
Level 3 or 4
x
x
x
x
x
x
Port 1
XFP
Power
Level 1
x
x
x
8599P-11
8599P-11
x
Power
Level 2
x
x
x
8599P-11
8599P-11
x
Power
Level 3 or 4
x
x
x
x
x
x
Installation Procedure
1) Configure DIP-switches
2) Installing the Module
3) Apply Power
4) Connect Cables
5) Verify Operation
Page 4
EU, for electrical and electronic equipment sold in the EU after July 2019. Such
disposal must follow national legislation for IT and Telecommunication equipment
in accordance with the WEEE directive: (a) Do not dispose waste equipment with
unsorted municipal and household waste. (b) Collect equipment waste separately.
(c) Return equipment using collection method agreed with Omnitron.
The equipment is marked with the WEEE symbol shown to indicate that it
must be collected separately from other types of waste. In case of small items the
symbol may be printed only on the packaging or in the user manual. If you have
questions regarding the correct disposal of equipment go to www.omniton-systems.
com/support or e-mail to Omnitron at [email protected].
Safety Warnings and Cautions
ATTENTION: Observe precautions for handling electrostatic discharge
sensitive devices.
WARNING: Potential damage to equipment and personal injury.
WARNING: Risk of electrical shock.
Customer Support Information
Phone:
(949) 250-6510
Fax:
(949) 250-6514
Address:
Omnitron Systems Technology, Inc.
38
Tesla
Irvine, CA 92618, USA
Email:
URL:
www.omnitron-systems.com
Page 3
