Page 3
WEEE directive: (a) Do not dispose waste equipment with unsorted municipal and
household waste. (b) Collect equipment waste separately. (c) Return equipment using
collection method agreed with Omnitron.
The equipment is marked with the WEEE symbol shown to indicate that it must
be collected separately from other types of waste. In case of small items the symbol
may be printed only on the packaging or in the user manual. If you have questions
regarding the correct disposal of equipment go to www.omniton-systems.com/support
or e-mail to Omnitron at [email protected].
Safety Warnings and Cautions
ATTENTION: Observe precautions for handling electrostatic discharge sensitive
devices.
WARNING: Potential damage to equipment and personal injury.
WARNING: Risk of electrical shock.
Customer Support Information
Phone:
(949) 250-6510
Fax:
(949) 250-6514
Address:
Omnitron Systems Technology, Inc.
38
Tesla
Irvine, CA 92618, USA
Email:
URL:
www.omnitron-systems.com
Page 4
iConverter
®
1-Module Redundant Power Chassis
User Manual
Product Overview
The iConverter 1-Module chassis features a number of redundant power inputs, RJ-45
port and alarm options. It supports primary and secondary power input options and
variety of power connection types. By utilizing the optional RJ-45 ports, the chassis
can be powered from a connected Power Sourcing Equipment (PSE). Optional contact
closure sensors are provided for connection to external alarm indicators. By installing
a managed iConverter module into the chassis, the chassis functions can be remotely
managed by Telnet and SNMP software such as Omnitron’s NetOutlook
®
Management
software.
This User Manual describes the following models:
Model
Number
Contact
Closure
Two
RJ-45
Ports
Primary Power Input
Backup Power Input
DC Input
Barrel
DC Input
2-Pin
Terminal
DC Input
3-Pin
Terminal
PoE
Power
RJ-45
DC Input
Barrel
DC Input
2-Pin
Terminal
8245-11pt
X
X
8246-11pt
X
X
X
8246-51pt
X
X
X
8247-11pt
X
X
X
8247-12pt
X
X
X
8247-220t
X
X
X
8247-31pt
X
X
X
8247-320t
X
X
X
8248-11pt
X
X
X
X
8248-12pt
X
X
X
X
8248-220t
X
X
X
X
8248-31pt
X
X
X
X
8248-320t
X
X
X
X
8248-51pt
X
X
X
X
8248-520t
X
X
X
X
to verify the iConverter chassis power supplies will meet the
requirements of the installation.
Backplane Architecture
The chassis features two Ethernet backplane buses (A and B) that operate at
10/100Mbps. Both buses are enabled by default. When an iConverter module that
supports Ethernet backplane connectivity is installed in the chassis, the A bus connects
directly to the RJ-45 Port A, and the B bus connects directly to the RJ-45 Port B. .
040-08245-001E 10/22
