Environmental Notices
The equipment covered by this manual must be disposed of or recycled in
accordance with the Waste Electrical and Electronic Equipment Directive (WEEE
Directive) of the European Community directive 2012/19/EU on waste electrical and
electronic equipment (WEEE) which, together with the RoHS Directive 2015/863/
EU, for electrical and electronic equipment sold in the EU after July 2019. Such
disposal must follow national legislation for IT and Telecommunication equipment
in accordance with the WEEE directive: (a) Do not dispose waste equipment with
unsorted municipal and household waste. (b) Collect equipment waste separately.
(c) Return equipment using collection method agreed with Omnitron.
The equipment is marked with the WEEE symbol shown to indicate that it
must be collected separately from other types of waste. In case of small items the
symbol may be printed only on the packaging or in the user manual. If you have
questions regarding the correct disposal of equipment go to www.omniton-systems.
com/support or e-mail to Omnitron at [email protected].
Safety Warnings and Cautions
ATTENTION: Observe precautions for handling electrostatic discharge
sensitive devices.
WARNING: Potential damage to equipment and personal injury.
WARNING: Risk of electrical shock.
OmniConverter
®
/Sx
User Manual
Product Overview
The OmniConverter /Sx are compact PoE/PoE+ 10Gigabit Ethernet switches
that feature SFP/SFP+ uplink ports and four or eight 10/100/1000 RJ-45 copper Power
Sourcing Power-over-Ethernet user ports.
The module functions can be configured using easily accessible DIP-switches.
OmniConverter /Sx 6 and 10 Port Modules
The /Sx is a Power Sourcing Equipment (PSE) that provides up to 30W
PoE+ (IEEE 802.3at) per RJ-45 port and supports frame sizes up to 10,240 bytes.
Front Panel
The front of the module provides access to the RJ-45 PoE and uplink ports.
RJ-45 PoE and Uplinks Ports
The RJ-45 PoE Ethernet user port supports 10BASE-T, 100BASE-TX and
1000BASE-T protocols, auto-negotiation, auto MDI/MDI-X crossover and can be
manually forced to a specific speed and duplex mode.
The module supports two 1/10G SFP/SFP+ transceiver uplink ports.
The SFP/SFP+ ports support SERDES 10GBASE-X and 1000BASE-X copper and
fiber transceivers, and SGMII 10/100/1000BASE-T copper transceivers.
Front Panel Layout
Reset Button
A reset button is available on the front of the module to restore the module to factory
default values and clear buffers and memory. Press and hold the reset button for
more than 5 seconds to restore the module to factory default values.
Page 3
Page 4
