5. Check if pump is hot - thermo protection shuts down motor at 230° F and restarts automatically when cooled down.
6. Check that outlet hose is not kinked.
The pump will not prime
1. Out of water supply
2. Inlet screen is plugged - Clean inlet screen; operation without this screen is not recommended.
3. Check for a large amount of sediment in filter housing. Replace the 20 and 5 micron filters if required.
4. Suction hose has a serious vacuum leak.
5. Inlet or outlet hose has a sharp kink
6. Pumping housing is cracked
Ordering Info
Part #
OmniFlow
OWF115
Water Filter, 20 Micron
OWF20
Water Filter, 5 Micron
OWF5
