background image

 

6

Safety Note:  

Always make certain your mirrors and Laser are well secured. You don’t want a bounce mirror to fall and 
hit anyone. In addition laser light is precise in its projection. Any movement over distance of the mirror  
will be amplified and may result in a loss of targeting or misalignment. 

 

For more features in your show or installation, we suggest any of our award-winning effects 
such as our Diffraction Bounce Mirrors and Remote Burst Effects.  

 

 

 

Your Stinger Laser System meets and exceeds all Federal Standards for Laser Products under 
CFR1000-1040 except for Subchapter J of Laser Product Notice 52. 

 

Laser Parameters  

 

 

Stinger outputs CW (Continuous Wave Coherent Laser Light)

 

 

There are no scheduled maintenance requirements to keep this product compliant with 21 CFR 
CDRH. 

 

There are no user serviceable parts inside.  Factory-trained personnel MUST do ALL service.  
Any tampering or misuse will result in the voiding of the warranty. DO NOT ATTEMPT TO OPEN 
THE LASER PROJECTOR FOR ANY REASON. 

 

DO NOT DIRECT THE LASER ENERGY TOWARDS ANOTHER HUMAN BEING. 

 

Shut off the main power prior to adjusting or cleaning the unit. 

 

Do not turn the unit on if the housing is damaged or becomes damaged. 

 

Stinger Laser Effects are for 

INDOOR USE ONLY

 

DO NOT

 plug Stinger power into any dimmer or relay pack! 

  
 
 

CAUTION:

 USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF 

                  PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN 
                  HAZARDOUS RADIATION EXPOSURE. 

 
 

STINGER 1 is CERTIFIED COMPLIANT BY:

 

OmniSistem Lights and Effects 
6403 South 208th Street 
Kent, WA 98032 
253-395-9500 Phone 
253-395-9494 Fax 

 

UNITS RETURNED FOR SERVICE WITHOUT A RETURN AUTHORIZATION NUMBER WILL BE 

REFUSED. USER MUST CONTACT DEALER TO OBTAIN AN R.A. NUMBER PRIOR TO SHIPPING. 

 
 

 

IMPORTANT: Units returned for service must be returned in ORIGINAL 
PACKAGING. Otherwise charges will apply and the warranty will be void! 

 

 
 
 

Product Stabilized 

Class  Output 

Wavelength 

Medium 

Stinger 1 R 

OST 

IIIR 

<4.95mW  

635-680nm 

Solid-state 

Stinger 1 G 

OST 

IIIR 

<4.95mW 

532nm 

DPSS YVO4 

Stinger 1 Y 

OST 

IIIR 

<4.95mW 

532nm 

DPSS YVO4 

 OST 

IIIR 

<4.95mW 

635-680nm 

Solid-State 

Stinger 1 MC 

OST 

IIIR 

<4.95mW 

532nm  

DPSS YVO4 

 OST 

IIIR 

<4.95mW 

635-680nm 

Solid-State 

Stinger 1 B 

OST 

IIIR 

<4.95mW 

473nm 

DPSS 

FDA Compliance – Laser Safety – DOs and DONTs 

Summary of Contents for Stinger 1 Series









Reviews: