The manufacturer cannot be made liable for damages caused by incorrect installations or insufficient safety
precautions!
Install the safety bond by inserting the quick link in the hole on the bottom of the base. Pull the safety bond over
the trussing system. Insert the end in the quick link and tighten the fixation screw.
The maximum drop distance must never exceed 20cm.
A safety bond which already holds the strain of a fall or which is defective must not be used again.
Screw the clamp via a M12 screw and nut onto the Omega holder.
Insert the quicklock fasteners of the Omega holder into the respective holes on
the bottom of the device. Tighten the quicklock fasteners fully clockwise.
9 of 18
