unit off. (Activates after
5 minutes.)
Adju
CHXX=XXX
Adjust Value of Each
Channel
Info
DriT
XXXC
Driver Temperature
Set
Rest
Rest
Reset
Move
RPan ON/
OFF
RTilt ON/
OFF
Degr 630/540
Enco
ON
/OFF
Mode
Mod1
/Mod2
Reverse Pan
Reverse Tilt
Choose Pan Degree
Encoder Wheel
Choose Pan/Tilt Mode
UI
Mic 0~99%,
60%
Sign Close/
Hold
/Auto/Music
Fan
Auto Speed
/High Speed
Hibe OFF, 01M~99M,
15M
Back 02~60M,
02M
Flip ON/
OFF
User
Use1
/Use2
Mic Sensitivity
Signal Mode
Fan Mode
Hibernate Time
Backlight Time
Flip Display 180
°
DMX Mode (St/Ex)
Cali
Code XXX
CHXX XXX
Password (050)
Calibrate Channel
Ver
X1.0.0
IC Version
load
ON/
OFF
Reload Default
CLEANING AND MAINTENANCE
The operator needs to make sure that safetyrelated and machinetechnical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator needs to make sure that safetyrelating and machinetechnical installations are inspected by a
skilled person once a year.
The following points must be considered during the inspection:
1) All screws used for installing the devices or parts need to be tightly connected and not corroded.
2) There must not be any deformations on housings, fixations, and installation spots (ceiling, suspension,
trussing).
3) Mechanically moving parts like axles must not show any traces of wearing (e.g. material abrading or
damages) and must not rotate unbalanced.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables), or
sediments. Further instructions depending on the installation spot and usage need to be adhered by a skilled
installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lintfree cloth. Never use alcohol or
solvents!
16 of 18
