OmniSense G-3 Series, User Manual, Page: 5 / 16

support@omnisense.com 1.805.340.9625
OmniSense G-3 Series Gateway Page 2
5. Powering up the G-3 Gateway

Connect power using the supplied USB power supply

The Internet LED will flash while the gateway is powering
up

Screw on antenna(s) finger tight. Do not over tighten!
6. Status LEDs and Their Meaning
The G-3 has useful status LEDs as shown in Figure 1 - LEDs.

POWER - when on indicates power is ON

CELLULAR - FLASHES when receiving a cellular signal.
Flash rate varies to indicate signal strength. Faster is
better signal, slower is worse signal.

WiFi - ON when WiFi is enabled, blinks to indicate data
activity

WAN/LAN - ON when Ethernet is enabled, blinks to
indicate data activity

INTERNET - When FLASHING indicates gateway is
powering up. When ON indicates the G-3 has a working
internet connection. When OFF the G-3 does NOT have a
working internet connection.
If its NOT ON the gateway
is NOT ONLINE.
Figure 1 - LEDs