OM5200 Technical Manual
Rev.
1.0
Document No.: 19B00293
Date: March 6, 2018 Page: 5
1.7 Printing and Cutting Positions
Tear Bar position
Center of the print dot line
< Figure 1.2 Printing and Cutting Positions >
NOTE:
Numeric values used here are typical values; the values may vary slightly as a
result of paper slack or variations in the paper.
1.8 Internal Buffer
1) Receive buffer: 128K bytes
2) Flash: 1M bytes
1.9 Electrical Characteristics
1) Supply voltage:
+7.5 VDC ± 5%
3) Current consumption (at 7.5VDC):
Operating: Approx. 1.5A (at ASCII Printing)
Peak:
Approx. 4.0 A (at print duty 100%, For 10
seconds or less)
Stand-by: Approx. 0.15A
15mm
