OmniPreSense OPS243-A, User Manual

Page: 16 / 22

UM-003-A OPS243-A User Manual 16 OmniPreSense Corporation
Short Duty Cycle Control – set to control duty cycle operation under 1 second. The time set is the amount
of time the sensor will delay between outputting the last report and starting the next report.
Command Name R/W Value
W? Current Delay time Read
W0 0 delay between reports Write
WI 1ms delay Write
WV 5ms delay Write
WX 10ms delay Write
W2 20ms delay Write
WL 50ms delay Write
WC 100ms delay Write
WD 500ms delay Write
WM 1000ms delay Write
Wn n*100ms delay Write 0 ≤ n ≤ 9
Long Duty Cycle Control – set to control the duty cycle operation greater than or equal to 1 second. The
time set is the amount of time the module will sleep between transmit/receive pulses and processing. For
settings longer than 1 second, the RF will be powered off to save power. In this manner, lower power
operation may be achieved.
Command Name R/W Value
Z? Current sleep setting Read
Z0 Sleep 0 Second Write Use to set back to normal operation.
ZI Sleep 1 Second Write
ZV Sleep 5 seconds Write
ZX Sleep 10 seconds Write
ZL Sleep 50 seconds Write
ZC Sleep 100 seconds Write
Z2 Sleep 200 seconds Write
Zn Sleep n*100 seconds Write 0 ≤ n ≤ 9
Z=n Set Sleep Time Write
Set the amount of time to sleep between data
processing. Ex., n = 5 would set the module to
sleep for 5 seconds (RF powered off) between
a transmit/receive pulse and processing. 0
≤ n
≤ 4,294,967