OmniPreSense OPS241, Code Update, Page: 5 / 8

AN-013-A OPS241 Code Update OmniPreSense Corporation 5
Figure 8. Files Ready to Program
Step 7. Press the Program all button and the programming process will start. It will take 3-5 seconds to
flash the new files into the OPS241. A progress window will appear as shown in Figure 9. Upon completion
the window will stay present but in the Result box it will say
“ success ” (Figure 10). Press the Exit button
to exit the window. The board is now successfully reprogrammed.
Figure 9. Programming Board in Process