UCL Installation Guide
Index
Mounting the Wall Plate
Mounting to Wooden Stud
Mounting
to
Masonry
Mounting the Cantilever Assembly
Configuring the UM-1 Adaptor Plate
Mounting the Display
Adjusting the Display
Roll
Control
Vertical
Tilt
Swivel
180°
Pan
Stowing
the
Screen
Mounting the Wall Plate
Mounting to Wooden Stud
1.
Determine the location where you want the display mounted on the
wall.
2.
Use stud finder to locate and mark the center of the two studs.
3.
Remove Plasma CL from box. Remove UM-1 Adaptor plate from the
Mounting Head, and set the four 3/8”-16 button head cap screws aside
for later.
Note that the cantilever arm is mounted at the end of the wall plate for
shipping.
4.
Remove cantilever arm from Wall plate.
5.
Align center mounting holes of wall plate with center marks on studs.
Using the wall plate as a template, mark the mounting holes and center
J box hole. Install J box as required.
Note:
Electrical outlets should only be installed by a qualified
electrician.
1
