00077482, Version 1.3
3/4
OMNILUX
LED BC-1 E27 Beam effect
Every person involved with the installation, operation and maintenance of this lamp have to:
- follow the instructions of this manual
Safety instructions / Operating determinations
This lamp has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes mentioned below.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer
will not accept liability for any resulting defects or problems.
If the lamp has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on
immediately. The arising condensation water might damage your lamp. Leave the lamp switched off until it
has reached room temperature.
Make sure that the available voltage is not higher than stated on the lamp.
Do not shake the device. Avoid brute force when installing or operating the device.
This lamp is only to be used in a device operating with an alternating voltage of 90 - 240 V, 50/60 Hz.
This lamp is designed for home use only.
Caution:
Never touch the illuminant during operation.
Do not switch the device on and off in short intervals as this would reduce the lamp’s life.
If this lamp will be operated in any way different to the one described here, this may lead to dangers like
short-circuit, burns, electric shock, burns, lamp explosion, crash etc.
OPERATION
After you screwed the LED BC-1 into the lamp socket and connected it to the mains, the device starts
running.
CAUTION!
Never open the plastic cap!
CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
