Care and Maintenance
To obtain the best from your Omnilux clear-U you
should follow these few simple rules.
• AVOID scratching the lens cover as scratches
may reduce the efficiency of the treatment.
• AVOID placing the Omnilux clear-U face
down on a hard surface as this may scratch
the lens cover.
• AVOID placing the Omnilux clear-U unit in
a dusty or dirty environment. Dirt or dust may
restrict the airflow through the Omnilux
clear-U causing it to switch off before the end
of the treatment time.
The exterior of the Omnilux clear-U unit may be
cleaned by wiping it with a damp (not wet) cloth
or an isopropyl alcohol wipe. Please refrain from
using any other cleansing products as these may
damage the plastic casing.
To reduce the risk of serious injury or fatal
electrical shock:
• ENSURE the Omnilux clear-U unit is switched
off and unplugged before the lamp is cleaned.
Outside the United States
The Wall Power Supply which comes with your
PAGE 14
Omnilux clear-U is designed to operate with an
electrical input between 90-250 Volts, at 50-60
Cycles.
When traveling outside the United States you
should check the local electrical service for
suitability if you are in any doubt.
The Wall Power Supply plug may not fit AC outlets
in countries outside the United States.
Storage
Avoid placing the Omnilux clear-U in a dusty or
dirty environment. Dirt entering the air intake or
ventilation flutes will shorten the life of the unit.
The mains lead and the power supply lead should
never be sharply bent, kinked, strained or crushed.
Store the clear-U in a dry environment, avoiding
extreme temperatures and direct sunlight.
Disposal
For protection of the environment, please package
and return this unit to Photo Therapeutics Inc at
the end of its working life.
Labeling
The label on the rear face of the Omnilux
clear-U contains the Model Number, Electrical
Requirements and Date of Manufacture.
